GE 23 Manual De Utilización Y De Instalación página 5

About the temperaturecontrols, gecom
The temperature controls are preset in the factory at5 for both
the refrigerator and freezer compartments. Allow 24 hours for the
temperature to stabilize to the preset recommended settings.
Several adjustments may be required. Each time you adjust
controls, allow24 hours for the refrigerator to reach the setting
you have selected.
Setting either or both controls to 0 stops cooling in both the freezer
and refrigerator compartments, but does not shut off electrical power
to the refrigerator.
Control settings will vary based on personal preferences, usage and
operating conditions and may require more than one adjustment.
NOTE: The refrigerator is shipped with protective film covering the
temperature controls. If this film was not removed during installation,
remove it now.
Performance Ak FlowSystem
The Perfommnce
:Mr How
System is designed to maximize temperature control in the reli_igerator and
fl'eezer compartments. This tmique spedal tbatuI'e consists of the Air Tower along the back wall of the
reli'igerator and the _dr Ttmnel on the bottom portion of the fl'eezer rear wall. Placing food in fl'ont of the
lou\'e_ on these components will not affect pe_timnance. _Mthough the _Mr Tower and the _Mr Ttmnel can
be removed, doing so will aflbct temperature perlkmnance. (For removal instructions, on-line, 24 horns a
day, contact us at ge.com or call 800.(;E.CARES. In Canada, contact us at geappliances.ca or call
1.800.361.3400.)