Area Of Application; General Information; Installation Instructions - Westfalia 335 197 Instrucciones De Montaje

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 10
Towing hitch
GB
Manufacturer: WESTFALIA-AUTOMOTIVE GmbH
Approval no. as per Guideline 94/20/EC:
Class: F
Technical data:

Area of application:

General information:

The vehicle manufacturer's specifications regarding trailer load and nose weight are deci-
sive for driving, and the values specified for the towing hitch must not be exceeded.
The towing hitch serves for towing trailers fitted with ball couplings and for use with load carriers
approved for attachment to the towing hitch. Any use other than that specified is prohibited. Driving
with a trailer must be adapted to the road conditions. The vehicle's handling is affected when a trailer
is being towed. Follow the vehicle manufacturer's instructions.
The fixing points specified as standard must be observed.
Clearance as per Annex VII, Fig. 30, of Guideline 94/20/EG must be ensured.
Installation of the towing hitch must be checked in accordance with the specifications in
Annex I, No. 5.10 of Guideline 94/20/EG (acceptance of installation work by technical expert /
service).These installation and operating instructions must be enclosed with the vehicle papers.

Installation instructions:

The towing hitch is a safety component and must only be installed by qualified personnel.
Any alteration or conversion to the towing hitch is prohibited, and would lead to cancellation of
design certification.
Remove insulating compound and underseal from vehicle (if present) in the area of the mat-
ing surfaces of the towing hitch. Seal any bare bodywork and bores with anti-corrosive paint.
Operating instructions:
Again tighten all securing bolts of the towing hitch after approx. 1000 trailer km, observing speci-
fied tightening torques.
The towing hitch must be kept clean and greased. However, if a stabilisation device, e.g.
Westfalia "SSK", is used, the towing hitch must be free from grease. Follow the instructions in
the relevant operating instructions.
As soon as the towing hitch diameter is 49.0 mm or less at any point, it must no longer be used
for safety reasons.
After the towing hitch is fitted, the empty weight of the vehicle increases by 28 kg.
16
Without electrical set
Model:
Maximum D-value:
Maximum nose weight: 130 kg
Vehicle manufacturer: Toyota
Model:
Model designation:
Westfalia order no.: 335 198
e13 00-0139
335 197
15,4 kN
LAND CRUISER 90 Series **J9**-G**N*W
J9
335 262
Subject to alteration.

Publicidad

Tabla de contenido
loading

Tabla de contenido