5. Enter new 4 digit remote consultation PIN code and confirm with [OK] again .
6. "OK ! » appears on the screen and the new remote consultation PIN code is now active.
• Remote consultation, access and control
With the remote access function, you can access voice commands from a Tone telephone. To do this, you must
call your phone and enter the 4 digit remote consultation PIN code for access to relevant functions. The buzzer
will sound as a confirmation. To continue, enter one of the commands in the following 8 seconds.
Tip: If your answering system is switched on, it reacts after 2-6 rings. If it is off, it reacts at the end of (approxi-
mately) 16 rings to allow you to enter the PIN code.
• Options
Listen to messages - press
Pause during message playback - press
Continue listening to the messages - press
Skip to the beginning of the message - press
To move to the previous message - press
To move to the next message - press
Delete a message during playback - press
Stop playback or recording of a message - press
Listen to announcement 1 - press
Listen to announcement 2 - press
Set the answer mode to 2 rings - press
Set the answer mode to 4 rings - press
Set the answer mode to 6 rings - press
Set the answer mode to 8 rings - press
Answer mode to "Announce Only" - press
Turn off the answering system - press
To finish, end the call
• Record a memo
- Press
- Save the desired message memo
- When you are finished, press
• Change announcement 1
- Press
- Enter the desired announcement
- When you are finished, press
- You can amend the announcement by repeating the steps above.
• Change announcement 2
- Press
- Enter the desired announcement
- When you are finished, press
- You can amend the announcement by repeating the steps above.
• Turn on the answering system
To turn on the answering system, proceed as follows:
- Call from a touch-tone phone. After about 16 rings, an acoustic beep sounds
- Then enter the required 4 digit remote consultation PIN code (see p17). Once the code is confirmed, a confirma-
tion tone sounds.
- You can turn on the answering system by pressing the keys
, then hang up.
, the announcement can then be heard.
the announcement can then be heard.
or by performing other functions remotely.
GB18