Bourgeat SATELLITE 4G Serie Instrucciones De Uso página 6

ENGLISH
INSTALLATION
y Setting up the trolley: The mobile trolley must be installed on a flat and horizontal floor. The air flow orifices necessary for
refrigerated trolleys, are located under the trolley must not be obstructed.
y Electrical connection: flexible conductors with a section of 1 or 2.5 mm2, 2 phases + ground, PVC insulation in a polyurethane
sheath.
y The units must be connected to a single-phase earthed 16 Amp female plug (13A for the UK), and will be connected under
the control of a high-sensitivity differential circuit breaker with protection against current overloads.
OPERATION
y This device is used to maintain the temperature hot and cold and cannot be used for heating, cooking or refrigeration.
y According to current regulations, the dishes placed in the trolley must be at a temperature between 0°C and 3°C for use a
cold link or greater than 63°C for use as a hot link.
y This device is certified by the EN631-2 standard which guarantees the compatibility of the latter with gastronorm containers
that meet the EN631-1 standard. This product is therefore designed to receive only gastronome containers in GN 1/1 and
GN 1/2 format.
y End of use: turn off the device with the 0/1 button. Do not unplug the loaded device directly with the power cord.
y Any particular use outside of the above framework, as well as any modification to the original design will result in releasing
the liability of the manufacturer, and will no longer allow the benefit of the right to use the NF Hygiène Alimentaire (Food
Hygiene) label. The NF Hygiène Alimentaire label certifies conformity with referential NF 031, which can be accessed on
www.marque-nf.com. Certified characteristics: cleanability and thermal performance.
Certifying body: AFNOR CERTIFICATION - 11 avenue Francis de Pressense - 93571 St Denis La Plaine Cedex. www.marque-
nf.com.
TECHNICAL DESCRIPTION
Models
Standardized sub-category
Possibilities of loading stainless steel containers :
Outside WxDxH mm
Outside volume
Inside volume m
3
Empty weight
Maximum load
Voltage
Power
Cooling capacity
Coolant load
Global warming potential (GWP)
Amperage
IP (protection index)
Energy consumption over 24 h (e24h)
Annual energy consumption (AEC)
Test environment class
Energy efficiency index (EEI)
Energy class
CE marking – These trolleys comply with the EN 60335-1, EN 60335-2-49 and NF D 40-016 standards for the heated model and EN 60335-1 and
EN 60335-2-89 standards for the refrigerated model. R134a refrigeration unit.
CONTROL ELEMENT
TURNING ON
y Press the On / Off button
y Setting the temperature
y Keep your finger on the SET button for 2 seconds. The setting indicator is blinking.
y Press the button to increase the temperature and the button
PRECAUTIONS FOR USE
y This device is not intended to be used by people (including children) with reduced physical, sensory or mental abilities, or by
people with no experience or knowledge, unless they are supervised or have been given prior instructions on how to use the
unit, by a person responsible for their safety.
6
GN3 - Hot model GN3 - Refrigerated model
843402
/
3 GN1/1 H100
752 x 576 x 688 mm
0,29 m
3
0,0405 m / 40,5 L
3
60 kg
30 kg
230V single phase 50/60 Hz
950 watts
/
/
/
4 A
25
/
/
/
/
/
+°C
- °C Switch On / Off
to lower the temperature.
842404
Low unit
3 GN1/1 H100
752 x 737 x 688 mm
0,38 m
3
0,0405 m / 40,5 L
3
75 kg
30 kg
300 watts
270 watts (at -5°C)
0,150 kg
1300
1,5 A
25
2,9 kWh
1059 kWh
4
56
D