W-Dmx™ Status - Cameo CLDROPP4 Manual De Usuario

W-DMX™
To pair the W-DMX receiver with a W-DMX compatible transmitter, W-DMX must be activated (W-DMX On) in the receiver's menu under
Wireless Settings. The Reset command must be also executed under the same menu item (select Reset and confirm with ENTER). The
receiver is now in pairing standby and waiting for a pairing request from a transmitter. Start the pairing by selecting Link in the menu of the
transmitter and then confirm; the pairing now takes place automatically. In the same way, several receivers can be paired to a transmitter
either simultaneously or one after the other. A W-DMX connection is always maintained until the connection is disconnected by means of the
Reset command in the receiver or the Unlink command in the transmitter, regardless of whether a device has been disconnected from the
power supply in the meantime.
W-DMX™ STATUS
W-DMX
deactivated
DMX Address
001
Mode
Static
CONFIGURE DMX START ADDRESS
Starting from main display 1, press MENU to enter the main menu. Now use the controls UP and DOWN to select the menu item DMX Mode
Slave
address and confirm with ENTER. You can now configure the DMX start address with UP and DOWN (hold for rapid value change; highest
value depends on activated DMX mode). Confirm by pressing ENTER.
Menu
DMX Address
DMX Mode
Status
DMX Delay
Stand Alone
Slave
Settings
de Mode
System Info
Macro Auto
Menu
CONFIGURE DMX MODE
DMX Address
Starting from main display 1, press MENU to enter the main menu. Now use the controls UP and DOWN to select the menu item DMX mode
and confirm with ENTER. Again use UP and DOWN to select the desired DMX mode and confirm with ENTER. Tables with the channel DMX Mode
assignment of the different DMX modes can be found in these instructions under DMX CONTROL.
DMX Delay
Stand Alone
Menu
dress
Slave
DMX Address
510
Settings
DMX Mode
System Info
DMX Delay
Stand Alone
Slave
Settings
System Info
elay
0
Menu
No/Yes
DMX Address
0.0s
DMX Mode
DMX Delay
elay DMX Delay
Stand Alone
0 Group
Slave
No by DMX?
Settings
0.0s Delay
System Info
elay
0
Menu
No
DMX Address
.0s - 2.0s
DMX Mode
8
DMX Delay
Static
Alone
Stand Alone
Dimmer
c
Slave
Macro Strobe
Settings
o Red
W-DMX W-DMX
activated, activated activated
Fixture Status
not paired and paired, and paired,
transmitter
is switched
off or out of
Mode
range
Color Macro
DMX Address
001 - 510
Mode
Loop
DMX Delay
Group
by DMX? No/Yes
Delay 0.0s
DMX Mode
DMX Delay
3 CH
Group
4 CH
by DMX? No
6 CH
Delay 0.0s
7 CH
13CH01
DMX Delay
13CH02
Group
20 CH
by DMX? No
Delay 0.0s - 2.0s
Stand Alone
Static
Color Macro
Auto
By DMX?
Loop
Warning! Delay
0
User Color
is controllable
Yes
by DMX now!
0.0s
Stand Alone
Static
Color Macro
Auto
Loop
User Color
W-DMX W-DMX
activated
and paired,
no DMX DMX signal
signal available
Mode
Auto
Menu
DMX Address
DMX Mode
DMX Delay
Stand Alone
Slave
Settings
Mode
System Info
User Color
0
DMX Delay
0 Group 0
by DMX? Yes
Delay 0.0s
0
Static
Dimmer
Strobe
Red
DMX Delay
Green
Group 0
Blue
by DMX? Yes
White
Amber
UV
Color Macro
Color O
Red
Amber
Yellow W
Yellow
Green
RF SIGNAL STRENGTH
Mode
Loop
DMX Mode
3 CH
4 CH
6 CH
7 CH
13CH01
13CH02
20 CH
By DMX?
Warning! Delay
Group
is controllable
by DMX?
by DMX now!
Blue
Lavender
Mauve
Magenta
Pink
Warm White
Mode
User Color
DMX Delay
0
Yes