Led Indicators - ESPA evopool evopool SilenPlus ControlSystem Manual De Instrucciones

11. LED INDICATORS

In SilenPlus pump: : : :
The possible LED combinations and their meanings are:
0 = LED OFF
1 = LED ON
2 = LED flashing slowly
3 = LED flashing quickly
MAN/ BACKWASH
FAULT Plus Plus Plus Plus
0 0
0 1
0 1
1 0
1 1
1 1
2 0
0 0
0 3
3 3
(. . . t oget her. . . )
3 0
3 1
3 1
0 0
2 1
2 1
When moving the control
of the ControlSystem:
Number of flashes
3
2
1
0
FILTRATION
Equipment status
Plus Plus Plus Plus
1 Filtration Plus function in Remote mode.
0 Backwash Plus function in Remote mode.
1 Mixed Cycle function in Remote mode. Motor at 100%.
1 Filtration Plus function in Manual mode.
Backwash Plus function in Manual mode.
0
1 Mixed Cycle function in Manual mode.
"Standby" mode. The equipment has power, motor stopped.
a) Valve in intermediate positions or position 6 in Remote mode.
0
b) Stop function in Manual mode.
c) Timer OFF position.
Filterwatch function active.
2
2 With Filterwatch active: Filter saturated, please clean it.
Configuration
3
Initial configuration: standing by for link with ControlSystem
1 Filtration Plus speed setting.
Backwash Plus speed setting.
0
1 Mixed Cycle speed setting.
3 Activation/deactivation of the Filterwatch function
(3 times)
2 No water error. Start-up retry attempted.
1 No water error. Full shut-down.
ControlSystem status
The ControlSystem is not linked to any SilenPlus.
Communication error. Call for service.
The ControlSystem works correctly.
Replace the ControlSystem battery
Functions
Errors
14
EN