Technical Specifications - Toolland VL4001 Manual Del Usuario

 An overloaded motor due to a prolonged operation time will automatically stop when reaching a
temperature of 130°. Please contact your official dealer immediately.
 Change the hydraulic oil after each season's use.
 Disconnect the base encasing.
 Disconnect the lid from the bottom of the hydraulic tank and drain the tank.
 Refill the tank until the oil reaches the mark on the dipstick.
 Fix the base encasing.
9.2 Storage
 Switch off and unplug the device from the mains before storing.
 Allow the device to cool for 5 minutes after every use before storing.
 Protect the power supply cable from heat, sunshine, aggressive liquids and sharp edges.
 Store in a clean and dry area. Do not store the device unprotected outdoors, next to corrosive materials or
in a damp environment.
 Store this splitter out of the reach of children.
10.

Technical Specifications

power supply .................................................................................................... 230 V~, 50 Hz
power consumption ..................................................................................................... 3000 W
motor ..................................................................................................................... 2800 rpm
max. work height ..................................................................................................... 1050 mm
max. diameter .............................................................................................................. 40 cm
weight ........................................................................................................................ 106 kg
IP rating ......................................................................................................................... IP54
capacity ................................................................................................................... 6 tonnes
hydraulic oil tank capacity .................................................................................................. 4 L
work heights ........................................................................................................................ 3
recommended oils .......... Mobil DTE11 - Shell Tellus 22 - BP Energol HLP-HM 22 - Aral Vitam GF 22
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of this device. For more info concerning this
product and the latest version of this manual, please visit our website www.toolland.eu. The
information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this
manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the
prior written consent of the copyright holder.
V. 02 – 09/11/2015
..................................................................... or similar oils from other brands
VL4001
8 ©Velleman nv