SUCTION HOOD CONTROLS
Timer symbol.
After selecting the suction hood Digit, press the Timer Management Digit to set the
countdown.
Grease filter maintenance symbol
The grease filter cleaning signal is displayed by LED
Charcoal filter maintenance symbol
The hood is set by default to ducting mode.
With no loads on, press the Hood controls digit to enable the suction hood.
Press and hold the Digit again for 5 seconds to:
Activate the charcoal filter:
The charcoal (odour) filter symbol
Deactivate the charcoal filter:
The charcoal (odour) filter symbol
After activation, the icon will light up to indicate that maintenance must be carried out on the
charcoal (odour) filter
Reset and reactivation of the charcoal filter
After having carried out maintenance on the filter:
• press
be started again.
• press
be started again.
Press " 9 " on the power bar to set INTENSIVE 1 speed. This setting is timed to operate for
"9"
10 minutes. Once this time has passed, the system will automatically return to the speed set
previously. It is deactivated by selecting a different speed.
Press " 9 " on the power bar twice to set INTENSIVE 2 speed. This setting is timed to operate
for 5 minutes. Once this time has passed, the system will automatically return to the speed set
previously. It is deactivated by selecting a different speed.
This function is only available if Automatic mode is deactivated. Automatic mode is deactivated
by pressing
Delay
Press the suction hood Digit and set a speed on the power bar.
Press the Timer management Digit, which was displaying "CL" but will change to the countdown.
This is pre-set to 15 minutes.
FMA 839 HI
lights up for 1 second..
flashes twice.
.
and hold for 5 seconds. - The grease filter LED will go out and the countdown will
and hold for 5 seconds. - The odour filter LED will go out and the countdown will
.
– 17 –
and it is always enabled.
EN