Wet Cleaning - IPC Soteco Idrozip - Wet Manual De Uso

AIR CLEANING AND DRY SUCTION
GB
- Insert the IDRO device by putting it on the baffl e
inside the inlet (fi g.1)
- Pour water (3,5 litres) into the tank (fi g.2)
- Insert the purifying tank B into the tank (fi g.3)
- Ensure parts W1 - Z are fi tted under the motor
head C as indicated
- Hook up the motor head C on the tank and lock
it up with the two hooks (fi g.4)
- For dry suction insert the fl exible hose G into the
inlet F (fi g.5) Attach to the hose the required
tools for cleaning
- Fix, at the end of the fl exible hose P, the extension
M (fi g.6)
- Fix in the most suitable accessory (S-T-U-V)
(fi g.7)
- Activate suction by pressing the red switch A,
after having connected the machine to the
proper grid (fi g.8); switch on the suction motor
and adjust the speed (fi g.9)
- Use-examples for dry cleaning (fi gg.10-11-12-
13-14)

WET CLEANING

- Insert the purifying tank B into the tank (fi g.3)
- Hook up the motor head C on the tank and lock
it up with the two hooks (fi g.4)
- Insert the flexible hose G into the inlet F
(fi g.5)
- Fix, at the end of the fl exible hose P, the extension
M (fi g.6)
- At the end, set the tool Q and fi x, under it, the
riser R (fi g.15) in order to pick up liquids from
the fl oors or wet tool H1 (WET)
- Activate suction by pressing the red switch A,
after having connected the machine to the
proper grid (fi g.8)
- Use-examples for wet cleaning (fi g.16)
ATTENTION
- Regularly clean up the floater contained in
the purifying tank - B- to let it easily slide into
its site and frequently check if a damage has
occoured.
18
INJECTION-EXTRACTION WASHING SYSTEM
(IDROZIP)
- Hook up the motor head C on the tank and lock
it up with the two hooks (fi g.4)
- Pour the detergent product into the tank (fi g.17)
set the tank stopper Y in the tank D and
connected the plug X to the head (fi g18)
- Fix, at the end of the fl exible hose P, the extension
M and the bend O (fi g.6)
- At the end of the bend O set the tool Q if You
want to wash carpets or moquette (fi g.19), if You
intend to wash fl oors or hard surfaces, set the
liquids-riser R under the carpet tool Q (fi g.15)
- Connect the tube K with the tube H and the
tube N with the front coupling of the injection
lever (fi gg.21-23-24)
- Set the end of the small hose H into the quick
fastening on the head C (fi gg.22-23-24)
- Fix the small hose H with the special clips
(fi g.20)
- After having connected the machine to the
proper grid, activate the pump by pressing the
green switch A1; to activate motor press the
red switch A (fi g.8)
- By pressing the cock handspike pull towards
You the accessory laying on the surface to
wash (fi g.25)
- At the end of the stroke release the cock
handspike and, after having lifted and remeved
the accessory, repeat the previous operations
(fi g.26)
- For washing fabrics or armchairs, release the
extension M from the handle P and detach
the tube N from the injection lever. Insert the
upholstery tool I by connecting the tube with
the injection lever coupling (fi g.27). To proceed
with washing, put the upholstery tool I on the
fabric and, squeezing the injection lever, drag
it towards yourself
- Use-example of the upholstery tool I (fi g.28)
ATTENTION
- Regularly clean up the floater contained in
the purifying tank - B- to let it easily slide into
its site and frequently check if a damage has
occoured.