General; Model Identification; Intended Use - Walther PILOT PREMIUM Instrucciones De Servicio

Nozzle insert
The nozzle inserts consist of air head, material nozzle and material needle
PILOT PREMIUM
Gravity-Feed Cup (FB)
PILOT PREMIUM
Material connection (FA)
PILOT PREMIUM FB HVLP
PLUS
PILOT PREMIUM FA HVLP
PLUS
PILOT PREMIUM FB HVLP
PILOT PREMIUM FA HVLP
PILOT PREMIUM
Gravity-Feed Cup (FB)
PILOT PREMIUM
Material connection (FA)
PILOT PREMIUM FB HVLP
PILOT PREMIUM FA HVLP
Nozzle equipment as selected:
0,3 ▪ 0,5 ▪ 0,8 ▪ 1,0 ▪ 1,2 ▪ 1,5 ▪ 1,8 ▪ 2,0 ▪ 2,2 ▪ 2,5 ▪ 3,0 ▪ 3,5 mm ø
Walther Pilot gun grease
(Pads 8 - 10 gr.)
Item number
Standard version V 15 107 01 ..3
Standard version V 15 107 02 ..3
/ Medium-pressure vers. V 15 107 03 ..3
/ Medium-pressure vers. V 15 107 04 ..3
Low-pressure version V 15 107 05 ..3
Low-pressure version V 15 107 06 ..3
Standard adhesive version V 15 107 15 ..3
Standard adhesive version V 15 107 16 ..3
Low-pressure adhesive vers. V 15 107 11 ..3
Low-pressure adhesive vers. V 15 107 12 ..3
Item number
V 00 000 00 001
30
1

General

1.1

Model identification

Models: Manual spray guns PILOT PREMIUM /-HVLP-PLUS /-HVLP
Type: PILOT PREMIUM
PILOT PREMIUM
PILOT PREMIUM HVLP
PILOT PREMIUM HVLP
PILOT PREMIUM HVLP
PILOT PREMIUM HVLP
PILOT PREMIUM
PILOT PREMIUM
PILOT PREMIUM HVLP
PILOT PREMIUM HVLP
Manufacturer: WALTHER Spritz- und Lackiersysteme GmbH
Kärntner Str. 18-30
D-42327 Wuppertal
Phone: +49(0)202 / 787-0
Fax: +49(0)202 / 787-2217
www.walther-pilot.de • Email:info@walther-pilot.de
1.2

Intended use

PILOT PREMIUM manual spray guns are solely intended for the spraying of spraya-
ble media such as:
• Lacquers and paints
• Greases, oils and corrosion inhibitors
• Ceramic glazing
• Staining
• Adhesives
Since all material-contacting parts are made of rustproof stainless steel, water-con-
taining media can be sprayed.
Please contact WALTHER Spritz- und Lackiersysteme GmbH, Wuppertal if the mate-
rials you wish to spray are not listed here.
The sprayable materials may only be applied to work pieces or objects.
The temperature of the spray material must never exceed 43 °C. Intended use also
encompasses the reading, understanding of, and compliance with all instructions
and information contained in the operating instructions.
Gravity-Feed Cup V 10 701
Material connect. V 10 702
Gravity-Feed Cup V 10 703
PLUS
Material connect. V 10 704
PLUS
Gravity-Feed Cup V 10 705
Material connect. V 10 706
Adhesive Gravity-Feed Cup V 10 715
Adhesive Material connect. V 10 716
Adhesive Gravity-Feed Cup V 10 711
Adhesive Material connect. V 10 712
31