Publicidad
Idiomas disponibles
Idiomas disponibles
Your Wave Maker Controller AQUA OCEAN
SPEED/FEED: Press button of SPEED/FEED to adjust the power rate from 30% to 100%.
Press the button for about 3s until the "10min"light was on to come to 10min
pause feeding.
MODE/LOCK: Press the button of MODE/LOCK to choose the wave mode M1-M4.Press the button
for about 3s to lock the knob until the Lock light was on to fixed your setting.
LIGHT MODE: Press the button of LIGHT MODE to turn on or turn off the Light Sensor.
KNOB: Dial to make the pumps pulse faster or slower.
IMPORTANCE NOTICE
When the button of "Light Mode" is pressed, the light sensor will be
turned on and the light
operating under the circumstances described below accordingly:
• How does the 'Light Mode' work?
Night Mode: when the Light sensor was on ,and when light sensor
detects weak light, the controller and pump will work under Night Mode
automatically: the wave mode will be set to M1, power to 30%; MODE/
LOCK and SPEED/FEED will stop working.
Day Mode: when light sensor detects day light, the Night Mode will stop
working and switch to pre-set Day Mode. Then, the MODE/LOCK and
SPEED/FEED will restart operating.
• ¿Cómo apagar el sensor de luz?
Pulse «LIGHT Mode» de nuevo para apagar el sensor de luz.
Se apagará la luz.
30%
M1 M2 M3 M4
Fast
Slow
M1
M2
will be turn on. The "Light Mode" will be
SPEED
100%
FEED
MODE
LOCK
10min
LIGHT
MODE
Light Sensor
M3
M4
Publicidad
