Proline PAC8K Manual De Instrucciones página 10

Installing exhaust hose into the wall
1. Place the indoor adapter against the wall and mark it.
2. Cut a hole in the wall, using the appropriate tools and safety equipment.
3. Feed the exhaust hose with the indoor adapter through the hole.
4. Place the outdoor adapter against the wall from the outside and mark the location for the four holes.
5. Drill four holes in the wall and insert expansion plugs in the holes.
6. Attach the outdoor adapter to the indoor adapter.
7. Fix the outdoor adapter on the wall by inserting and tightening four screws.
Note:
When not in use, cover the hole with the cap.
Installing exhaust hose to window slide bar
Note: The window kit is only designed to be installed with sliding windows.
The window kit is not designed or to be used with casement style windows.
1. Measure your window kit according to the dimensions of your sliding
window.
 If the slide bar is larger than your required dimensions, it can be
cut using a saw or power tool of the sort.
2. Extend the slide bar length to match the width of the window
(vertically or horizontally), and then tighten the bolt to hold the
length of the slide bar.
Only applicable to the exhause hose with the indoor adapter
8