Using The Remote Control; Installing Batteries; How To Use The Remote Control - Proline PAC8K Manual De Instrucciones

Remote display
Sending signal
Operating
modes

USING THE REMOTE CONTROL

Installing batteries

1. Remove the battery cover.
2. Insert two supplied batteries in the compartment,
making sure the + and – polarities are correctly
aligned.
3. Reinstall the battery cover.
NOTE: If you will not use the appliance for a long time, remove the batteries from the remote control.

How to use the remote control

Point the remote control toward the signal receiver at the front of the appliance and then press the desired
button on the remote control. The appliance will generate a beep when it receives the signal.
 Make sure there is no curtain or other object between the remote control and the appliance.
 The remote control can send signals from up to 8 meters away.
CAUTION:
 Do not allow the signal receiver to receive strong direct sunlight, since it can adversely affect its
operation. If the signal receiver is exposed to direct sunlight, close a curtain to block the light.
 Using a fluorescent lamp with a quick starter in the same room may interfere with transmission of the
signal.
Timer On / Timer Off
ON/OFF display
Setting fan speed
6
Sleep mode
Temperature/Timer
display