Safety Recommendations - Ibiza sound DIGI-AMP300 Manual De Instrucciones

SAFETY RECOMMENDATIONS

MAGNETIC FIELD
CAUTION! Do not locate sensitive high gain equipment such as preamplifiers or tape decks directly
above or below the unit. This unit has a strong magnetic field which can induce hum into unshielded
devices that are located nearby. The field has strongest spots just above and below the unit. Locate
the amplifier at the bottom of the rack and the preamplifier or other sensitive equipment at the top.
•
To prevent electric shock, do not remove top or bottom covers.
•
No user serviceable parts inside.
•
Refer servicing to qualified servicing personnel.
•
Disconnect power cord before removing back panel cover to access gain switch.
•
No naked flame sources, such as lighted candles, should be placed on the apparatus
•
The unit should only be used in moderate climates
•
This unit should be cleaned only with a dry cloth. Avoid solvents or other cleaning detergents
•
A minimum distance of 0.5m around the unit must be kept to ensure sufficient ventilation and avoid
overheating
•
No naked flame sources, such as lighted candles, should be placed on the apparatus
•
The ventilation holes should not be impeded by covering the ventilation openings with items, such
as newspapers, table cloths, curtains, etc.
•
Do not expose the unit to dripping or splashing water.
•
Do not put objects filled with liquids such as vases, on the apparatus.
•
The amplifier is part of the CLASS I electrical appliances. It must be connected to a MAINS outlet
with a protective earth connection.
•
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect
device shall remain readily operable
•
Where an all-pole MAINS SWITCH is used as the disconnect device, the location on the
apparatus and the function of the switch shall be described and the switch shall remain readily
operable.
WARNING! To reduce the risk of electric shock, do not expose this equipment to rain or moisture!
The exclamation point triangle is used to alert the user to important operating or maintenance
instructions
The lightning bolt triangle is used to alert the user to the risk of electric shock
Description of the functions
1. POWER SWITCH
2. BRIDGE INDICATOR
When the machine is bridged, this LED is lit.
3. PROTECTION INDICATOR
When the protection circuit has been triggered, this LED is lit.
4. POWER SWITCH INDICATOR
When the machine is powered on, this LED is lit.
5. LEFT SIGNAL INDICATOR
When the left channel outputs, this LED flashes.
6. LEFT CHANNEL CLIPPING INDICATOR
When the left channel outputs clipping, this LED flashes.
7. LEFT CHANNEL VOLUME KNOB
Rotate this knob to adjust volume.
8. RIGHT CHANNEL CLIPPING INDICATOR
When the right channel outputs clipping, this LED flashes.
©Copyright LOTRONIC2014
GB
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Page 3