Application And Operation Megaview20; Contents Of The Packing - Marmitek MEGAVIEW20 Manual De Instrucciones

TV channel on your antenna cable. Then you can watch this signal as a kind
of internal TV-channel everywhere in your home assumed there is an
antenna connection.
The Marmitek products are manufactured with the utmost precision and are
of high quality. Please read this manual first and follow the instructions so
you can enjoy the possibilities of this product optimally.

1. APPLICATION AND OPERATION MEGAVIEW20

The antenna cable is, as you could say, looped into the modulator. The
incoming antenna signal is connected to the antenna connection, besides
that you can connect an A/V device of your choice to the input on the
MegaView20. The outgoing antenna signal then carries both the standard
antenna signal and the added Audio/Video-signal (of for instance a DVD-
player or AV-camera). On every TV connected to this antenna system after
the modulator ('To TV / RF OUT' of your MegaView20) the added
Audio/Video-signal can be watched on the selected channel. You do not
need to make any changes to the rest of your antenna network.
The modulator itself has no influence on the strength of the signal. The
maximum length of the cables to be used is determined by the present
cable network in your home. If you want to connect multiple TV sets or
want to use a longer cable, we advice you to use an amplifier/splitter. Your
antenna material supplier can advice you in this.

2. CONTENTS OF THE PACKING

Check after unpacking if the following parts and accessories are present:
4 © MARMITEK