Extra Options - Marmitek MEGAVIEW20 Manual De Instrucciones

but only frequencies, you can look this up in the enclosed table in the
back of this manual. This set channel now shows the connected A/V
device and from now on you can watch this on the channel you selected.
6. Now check if there is no interference on the TV-channels close by. If
there is, you need to find two (or if possible three) other free channels
and set the modulator to that one.
If you have multiple TV sets in your home (connected to the same antenna
network), then you can watch this signal on the other TV sets as well.
However first you need to set the right channel on every TV.

6. EXTRA OPTIONS

Infrared extension
Do you want to operate your DVD-player or satellite tuner in the living
room from your bedroom? Or operate devices in a closed cabinet?
Marmitek infrared extenders make sure that the signal of your remote
control goes right through cabinet doors, walls and floors.
• The VideoControl3 sends the signal of your remote control back to
another room via the existing antenna cable.
• Right through walls and ceilings with your existing remote control? This
is possible with the PowermidXS. The wireless solution for extending
the signal of your remote control!
Connecting multiple devices
• Do you want to connect multiple A/V devices? With the Connect 236
you can connect all of your devices to your MegaView20 with just one
cable, preserving the quality.
• You can also connect a second A/V device using a second
MegaView20. By selecting another TV channel on it you can watch
both devices at different places.
A/V Camera
Do you want a more comfortable and safer feeling in and around your
house? With the MegaCam1 you can keep an eye on your house, garden,
garage and driveway. Connect this to your MegaView20 and you can watch
these images on TV in various rooms in your house.
8 © MARMITEK