Publicidad
Idiomas disponibles
Idiomas disponibles
PC 3050
3.
Press "MODE" to select the unit. Four units in all.
4. Place the item to the middle of the platform .When stable ,the sign of "hold" will be shown in the
upper left of LCD displayer，the number on the LCD displayer is the accurate weight of the item.
5. If the LCD is not 0.0 before weighing, please press "TARE" to set the LCD to "0.0".The sign of "ZERO "
will be shown on the left LCD.
6. If there is weight on the scale, press the TARE button to set it to zero, and the LCD screen will display
as below.
7. When the scale is not in use, please press "ON/OFF" to turn off the scale and put back the cover.
CALIBRATION
Turn on the scale and press "MODE" for 3 seconds, the LCD will show "CAL" then release the
-
"MODE" button.
10
Publicidad
