48
AVENTICS | SERCOS III | R412012613–BDL–001–AC
Delivery contents
Transportation
and storage
During cleaning
W
A problem-free and safe operation of the devices requires
proper transport, correct storage, installation and assembly.
W
Only clean the device using a slightly damp cloth. Only use
water and, if necessary, a mild detergent.
3
Delivery contents
The delivery contents include:
W
1 bus coupler according to configuration and order
W
Assembly and maintenance instructions (R412012613)
4
About This Product
4.1
Performance specifications
The bus coupler for SERCOS III is used to connect the DDL
system to a SERCOS III fieldbus.
The bus coupler communicates with the fieldbus system and
monitors the DDL (Drive and Diagnostic Link).
The bus coupler is designed only for use as a slave on a
SERCOS III bus system.
The bus coupler is a modular I/O device in accordance with the
SERCOS III specification (Function Specific Profile I/O,
Version 1.1.2).
The bus coupler for SERCOS III connects the local I/O devices with
the SERCOS III network. In the data model, these I/O devices are
modularly connected to the bus coupler.
The bus coupler functions as an interface between the SERCOS III
network and the local DDL participants.