Call To Reception; Call Waiting; Accessing Programming Mode; Remote Connection - Fermax 4545 Manual De Instalador Y Usuario

TELEPHONE INTERFACE

Auxiliary Relay Activation.
You can activate (or deactivate) an auxiliary relay at any time via a simple pressing of a
key, from different telephones: Internal or External and situations: during the conversation
or in standby.
The relay has a programmed time for it to automatically turn off after activation, except
when programmed as bi-stable (time= 00).
In Standbyor Remote mode.
o
Key Option
* 7 Auxiliary Relay Activation during the auxiliary relay time (ART)
* 8 Auxiliary Relay Deactivation
o During the Conversation (status: communication with the entry panel).
Key Option
7 Auxiliary Relay Activation during the auxiliary relay time (ART)
8 Auxiliary Relay Deactivation


Call to reception.

You can call the reception in standby mode by only pressing a couple of keys from the
internal telephones.
Key Option
* 4 Call to VDS reception.
 Call waiting.
When an interior telephone and entry panel or external line are in communication, or
when two internal telephones are in process and there is a call entering from another
device (entry panel), a special ring tone sounds and you can temporarily hold the current
conversation to attend to the incoming call and then resume the previous call.
Key Option
4 Call waiting. Resume the conversation. See note.
Notice:
- If the entry panel stays in standby, when receiving an external call and it hangs up before
recuperating the connection with the entry panel, it can not be recuperated since the
system returns to standby.

Accessing Programming.
You can access the programming menu from the interior telephone to confi gure all of the
internal parameters. See
GUIDE.


Remote Connection.

You can connect remotely to the interface from an external telephone (if the external line's
terminal is connected to the external telephone line), from a telephone switch extension
(if the external line's terminal is connected to a switchboard extension) in order to access
all of the functions. The remote telephone or extensions must mark the number of
the line in which the interface is connected and wait the maximum calling time.
The interface will generate the call in the internal telephones and if
PROGRAMMING: ACCESS - OPTIONS
or
QUICK PROGRAMMING
Page 21