Fermax 4545 Manual De Instalador Y Usuario página 57

TELEPHONE INTERFACE
VDS Address
001
002
003
004
005
006
007
. . .
199
Notice:
- In this status, the interior telephones are not operative, except for receiving external
calls and for programming.
- In this mode you can not connect Fermax telephones to the installation.
- Upon receiving the call if you hear: beep beep beep, press * to answer and # to end
(hang-up) the conversation.
 3 Dip-Switch: Device for confi guring the operating mode.
Switch
2
Steps for creating the forward phone directory:
1. Accessing Programming mode: pick up the telephone and before 3 seconds pass, press
# # #, confi rming access to programming mode via a confi rmation tone: beep-beep-beep.
(If already in this mode this step is not necessary).
2. Press the 3 key, you hear a beep.
3a)Enter a new telephone number:
a) Enter the position of the directory: 4+N / VDS SCM (001-002) / VDS MCM (001...199).
Enter 3 digits. For example: 002. You hear: a confi rmation beep will sound,
b) Enter a new telephone number. Maximum 16 digits (0...9). To enter a pause, use #
(for a telephone switchboard). For example, enter the telephone number: 605 812
339. You hear: a confi rmation beep will be emitted,
c) Press* you hear: beep-beep of the correctly entered data, (if incorrect you hear:
Beep-bop).
Notice: If more than one number is going to be entered in the directory, you don't have
to exit back to the main menu every time. After * enter the next position in the directory.
d) Press #, you hear beep-beep-beep, return to the confi guration menu.
Sequence completed: # # # (beep-beep-beep) 3 (beep) 002 (beep) 605 812 339 (beep) *
3b) Deleting a telephone number:
a) Enter the VDS Address (001...199) ¡. For example: 002. You hear: a confi rmation
beep will be emitted,
b) Press* you hear: beep-beep of the correctly entered data, (if incorrect you hear:
Beep-bop)
c) Press #, you hear beep-beep-beep, return to the confi guration menu.
Sequence completed: # # # (beep-beep-beep) 3 (beep) 002 (beep) * (beep-beep) # (beep-
beep-beep)
Telephone number
0 # # 619 333 258
0 # # 620 342 255
0 # # 620 375 214
0 # # 627 545 302
1212
2715
2321
. . .
2635
Parameters
Mode
(beep-beep) # (beep-beep-beep)
ON OFF
MCM SCM
Page 25