Fermax 4545 Manual De Instalador Y Usuario página 62

TELEPHONE INTERFACE
When you access this menu, the audio setting is made during communication with the panel
1 (it automatically connects upon entering in the menu).
Audio Adjustment Keys :
Parameter Increase Key
INPUT Audio
OUTPUT Audio
Exit
Steps for adjusting audio from the programming menu:
1. Accessing Programming mode: pick up the telephone and before 3 seconds pass, press
# # #, confi rming access to programming mode via a confi rmation tone: beep-beep-beep.
(If already in this mode this step is not necessary).
2. Press the 9 key, you hear a beep.
3. Enter the desired parameter value:
a) Input Audio (3 / 6), for example: enter «3» twice to increase the input audio, (you
hear: a confi rmation beep each time you press the key.
b) Output audio (1 / 4), for example: enter 4 three times to decrease the output audio,
(you hear: a confi rmation beep each time you press the key.
4. Press #, you hear beep-beep-beep, return to the confi guration menu.
Sequence completed: # # # (beep-beep-beep) 9 (beep) 3 (beep) 3 (beep) 4 (beep) 4 (beep)
4 (beep) # (beep-beep-beep)
Key # - Exit
o
Return to standby, that is, exit the confi guration menu.
Page 30
Decrease Key
3
1
(key: #)
6
4
+ +
- -