Kasanova ESY000003 Manual De Instrucciones página 9

TREE TRAIN
9
ASSEMBLY INSTRUCTIONS
1. Set up your Tree
Make sure your tree is set in a secure location away from walls so you can
easily walk around it. (Figure 1).
TREE TRAIN FIRST- Assemble your Tree Train into your tree before adding any
other decorations or lights.
HELPFUL HINT: We suggest you wear protective eye wear and a long sleeve
shirt when installing your Tree Train to avoid uncomfortable contact with tree
needles (artificial or natural).
2. Attach Tree Clamp
Decide where in the tree you wish to set up your Tree Train. Your Tree Train
railways are designed to be assembled in a section of your tree that has a limb
spread of approximate 35 inches in diameter or less (Figure 2a).
OPEN TREE CLAMP
Take tree clamp apart by loosening the 4 screws. Position the 2 halves on either
side of a clear (branchless) 3-4 inch portion of the tree trunk (Figure 2b).