Start Measurement - Gima OXY-4 Manual De Uso

18
ENGLISH
Display
Power
3. Battery Installation
1. Press the lock button of the battery
cover, meanwhile, pull the cover back
and take it out.
2. Refer to Figure 2, insert two AAA size
batteries into the battery compartment
properly.
Figure 1
3. Replace the cover.
Please make sure that the batteries are
correctly installed since the incorrect
installation may cause the device
inoperable.
4. Operation

4.1 Start Measurement

1. Open the clip as shown in Figure 3.
2. Put finger into the rubber cushions of the
clip (make sure the finger is in the correct
position), and then clip the finger.
3. The device will power on automatically
in 2 seconds, and start to display software
Figure 2 Battery Installation
version number.
4. Next enter into data display
screen (as shown in Figure 4).
The user can read the values
and view the waveform from
display screen.
Figure 3: Put finger into the Oximeter