Idmed NeuroLight Manual Del Usuario página 21

EMC Immunity
Basic EMC
Phenomenon
standard
ELECTROSTATIC
DISCHARGE
61000-4-2
(ESD)
Radiated RF EM
Fields 61000-4-3
Proximity fields
from RF
wireless com-
61000-4-3
munications
equipment
Electrical fast
transients /
61000-4-4
bursts
Surges
Line-to-line 61000-4-5
Surges
Line-to-ground 61000-4-5
Conducted
disturbances
induced by RF 61000-4-6
fields
RATED power
frequency
61000-4-8
magnetic fields
Manual del Usuario NeuroLight
Professional
healthcare
facility
environment
Immunity Test
Levels
± 8 kV contact
IEC
± 2 kV, ± 4 kV,
± 8 kV,
± 15 kV air
3 V/m
80 MHz – 2,7
IEC
GHz
80 % AM at
1 kHz
Complies to
IEC table 9 of IEC
60601-1-2
(2014)
± 2 kV
IEC 100 kHz
repetition
frequency
IEC
± 0,5 kV, ± 1 kV
± 0,5 kV, ±
IEC
1 kV,
± 2 kV
3 V
0,15 MHz –
80 MHz
6 V in ISM
IEC bands
between 0,15
MHz and
80 MHz
80 % AM at
1 kHz
IEC 30 A/m
50 Hz or 60 Hz
Compliance
levels
± 8 kV contact
In order to reduce ESD, the devi-
ce must be used in a 35% humidity
± 2 kV, ± 4 kV,
environment or more
± 8 kV air
Use of this equipment adjacent to or
stacked with other equipment should
3 V/m
be avoided because it could result
80 MHz – 2,7
in improper operation. If such use is
GHz
necessary,
80 % AM at
the
1 kHz
observed to verify that they are operating
normally
Complies to In order
table 9 of IEC netic
60601-1-2 separation from RF communication
(2014) equipment of 30cm
The NeuroLight may temporarily not
± 2 kV display
100 kHz electromagnetic disturbances such
repetition as the use of electrosurgery device. In
frequency that case, the NeuroLight will maintain
the safety of the patient and the user.
Mains power quality should be that of
± 0,5 kV, ± 1 kV a typical residential, commercial or
hospital environment.
Mains power quality should be that of
± 0,5 kV, ± 1
a typical residential, commercial or
kV, ± 2 kV
hospital environment.
3 V
0,15 MHz –
80 MHz
6 V in ISM In order to prevent electromagnetic
bands disturbance, keep minimum separa-
between 0,15 tion from RF communication equip-
MHz and ment of 30cm
80 MHz
80 % AM at
1 kHz
Mains power quality should be that of
30 A/m
a typical residential, commercial or
50 Hz or 60 Hz
hospital environment
EMC
Instructions/precautions
this equipment
other equipment should
to prevent electromag-
disturbance, keep
result during
and
be
minimum
transient
21