Risks Associated With Use Of The Machine; Noise Risk; Vibration Risk - Castellari FENIX V2 Manual De Uso Y Mantenimiento

Before the machine can be restarted the device that triggered the stop must be reset
(fuse).

1.7. Risks associated with use of the machine

1.7.1. Noise risk

The noise level was measured with the machine running as per ISO 3746. The following
results were obtained:
- Average sound pressure LpA (A) dB 76,49
These figures show that the machine generates high noise levels.
When using the machine it is therefore compulsory for users to wear the
protection such as ear defenders or ear plugs to prevent damage to hearing
over time.

1.7.2. Vibration risk

The level of vibration was measured with the machine running as per UNI EN ISO
5349-2 : 2015 so as to evaluate the vibration transmitted to HAND-ARM.
The following results were obtained:
Level of hand-arm vibration: 13,10 m/s
on a working day of 8 hours. Is recommended to use the tool in combination
with appropriate PPE that attenuate the actions, such as gloves damping.
Castellari S.r.l. • Via Lasie 16/E
OLIVANCE PN - PNS - PN T - PN X - PN XT
OLIVANCE PN - PN S - PN T - PN X - PN XT
2
assuming an average time of 15 minutes of use
IMOLA (BO) 18
Castellari S.r.l. • • Via Lasie 16/E
FENIX V2
• IMOLA (BO)
FENIX
19