Removing Mineral Build-Up; Replacing The Sealing Ring; Storage - EASYHOME A8 Manual Del Usuario

Removing mineral build-up

To remove mineral deposits in the steamer, we recommend filling the steamer with
half water and half vinegar.
1. Fill the steamer with the water and vinegar solution. Allow it to soak in the
steamer for 30–40 minutes.
2. Drain the solution and refill the steamer with fresh water. Drain and repeat until
any vinegar odor is gone.

Replacing the sealing ring

The sealing ring on the cap is subject to wear. If you find leakage of steam along the
edge of the cap, replace it with the sealing ring replacement

Storage

1. Unplug power cord from the electrical outlet.
2. Allow the steamer to cool down (15 minutes for complete cooling).
3. Remove the accessory from the steam nozzle (if attached) and lift the cap to
remove it.
4. Drain any remaining water to minimize potential mineral build-up and replace
cap (do not fully tighten).
5. Bundle power cord loosely.
6. Store the steamer in a cool, dry location, along with all included accessories. Keep
the steamer out of the reach of children.
Sealing ring
Storage
8 .
9