TRP Bycool FLAT Manual Del Usuario página 4

FLAT
EN
Functioning of control
OPERATION
CENTRIFUGAL
BLOWER
Green - minimum
Orange - average
Red - maximum
ALARM CLOCK
1/2 h interval
programming, up to
a maximum of 2h.
Functioning of remote control
HOW TO ACTIVATE REMOTE CONTROL
FOR THE 1ST TIME OR WHEN BATTERY IS
DISCONNECTED
1º Switch equipment off, button
off).
2º During 6 seconds push button
panel until all leds stop flashing except those with
rhombus
3º Push ON/OFF button of remote control. If
equipment is switched on and off, remote control
will have been activated successfully.
WARNING
Buttons should not
REMOTE CONTROL WILL BE BLOCKED
TIME WHEN PUMP
IS FUNCTIONING
Green - 10 sec
Orange - 20 sec
Red - 30 sec
GREEN LIGHT
Quick flashing:
period when pump is
working.
Slow flashing:
period when pump has
stopped.
(led ON turned
indicated on
remain pushed otherwise
TIMER TO
RED LIGHT
SWITCH OFF
If switched on = low
EQUIPMENT
water level
- approx. 6h
- approx. 3h
- approx. 1h
DOORS
ALARM
1
2
FUNCTIONS OF BUTTONS
1.- Switching on / off of equipment.
2.- Increase / decrease of pump activation times.
3.- Reduce speed of centrifugal blower.
4.- Increase speed of centrifugal blower.
4
Air conditioning for vehicles
ORANGE
LIGHT
Timer led
SWITCH ON - OFF
Initial conditions:
- Minimum speed centrifugal
blower
- Pump 10 sec.
- Time delayed switch off
4
3