How To Use Your Riveting Tool - FAR RAC 181 Instrucciones De Uso

HOW TO USE YOUR RIVETING TOOL

WARNING!
Before using the tool it is absolutely necessary to
fit the nails container (C), or the nails baffle (T).
Controlled suction (factory settings) (pic. f1-f2)
From the "ON" position ensure that the button (D) is positioned as
in the picture (pic. f1), ie towards the inside of the riveting tool.
f1
f2
G
18
GB
The suction starts pressing the lever (G) as shown in the
picture (pic. f2).
Suction OFF (pic. f3-f4-f5)
From the "OFF" position, through the provided pin (N), push in
the button (D), as shown in the picture (pic. f3).
In this setup, the nail comes out from the front by gravity or
from the back of the tool by tilting it, as per picture (pic. f4-f5).
f3
f4
D
f5
Date 04-2017
RAC 181
D
N
Revisione - 01