Haier 1U105S2SS1FA Manual De Instalación página 7

WARNING
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
The appliances are not intended to be operated by means of an external timer or separate remote-control system.
Keep the appliance and its cord out of reach of children less than 8 years.
This appliance is intended to be used by expert or trained users in shops, in light industry and on farms, or for
commercial use by lay persons.
Disconnect the appliance from its power source during maintenance service and when replacing parts.
1) Means for disconnection, such as circuit breaker, which can provide full disconnection in all poles, must be
incorporated in the fixed wiring in accordance with the wiring rules.
It is necessary to allow disconnection of the appliance from the supply after installation. The disconnection may be
achieved by incorporating a switch in the fixed wiring in accordance with the wiring rules.
The method of connection of the appliance to the electrical supply and interconnection of separate components, and
the wiring diagram with a clear indication of the connections and wiring to external control devices and supply cord are
detailed in below parts.
2) The appliance shall be installed in accordance with national wiring regulations. Wiring must be done by a qualified
electrician. All the wiring must comply with the local electrical codes.
3) The cord of the H05RN-F type or the electrically equivalent type must be used for power connection and
interconnection between outdoor unit and indoor unit. The size of the cord is detailed in below parts.
4) Details of type and rating of fuses, or rating of circuit breakers / ELB is detailed in below parts.
5) The information of dimensions of the space necessary for correct installation of the appliance including the
minimum permissible distances to adjacent structures is detailed in below parts.
5