Gima Domino Manual De Uso página 14

ENGLISH 14
2.Press button 'M2' to convert °F mode into °C mode.
Annotation: When under the mode of function reset, if without any operation in 1 minute, the device will
automatically return to standby mode.
CARRY OUT A MEASUREMENT
1.Insert the tube plug into the air connector. Before the measurement, take 3~5 times deep breath and relax
yourself. Don't talk or move your arm;
2.Press button 'START', and all symbols will appear on display in 2 seconds as Fig.9. Then two short beep
will sound and '0' will appear on the screen. Pump begins to inflate with display showing the reading of
pressure. Generally the pressure will reach 190mmHg as Fig.10;
3.The pump stop inflating and pressure begins to decrease gradually, during which the user's blood pressure
and pulse will be calculated as Fig.11;
4.There will be a long beep following the accomplishment of measurement. The air in the cuff will deflate
quickly and the blood pressure reading, pulse reading will show in the display. Moreover the measuring time
will also display together in two screens alternately. At the same time, the ' ' will flash to remind the user
to record the reading as Fig.12;
5.Press button 'M1' or button 'M2' to record the reading in corresponding memory. For example, if button
'M2' is pressed, the display will show as Fig.13. If the user does not press button, the reading won't be
recorded;
6.Press the button 'START' to return to standby mode. Please rest for at least 3 minutes for another
measurement. The device keeps unused for 3 minutes, the device will be return to standby mode automatically.
Automatic inflation
There are 4 given levels of given inflation pressure for this device: 190mmHg, 230mmHg, 270mmHg and
300mmHg.
When 190mmHg is not enough or movement of arm occurs, the device will automatically inflate to reasonable
pressure level to ensure a successful measurement. It is not a fault.