Gima Domino Manual De Uso página 15

15 ENGLISH
Rapid deflation during measurement
If you do not feel well during measurement or want to stop the measurement for some reason, you can
press the START button. The device will quickly release the air in cuff and the device will be returned to
standby mode.
The indicator displays a segment, based on the current data, corresponding to the WHO classification.
For example, if your blood press is 145mmHg (Systolic Pressure), 88mmHg (Diastolic Pressure), according
to the world health organization standard, your blood pressure level is Mild Hypertension
Note: If the systolic blood pressure and diastolic blood pressure fall into different categories, the higher
value should be taken for classification.
FUNCTION OF MEMORY
Memory recall
1.Domino can store 60 sets of readings each in ' ' and ' ', and will automatically calculate the average
value of the latest 3 readings for 'M1' and 'M2' respectively. When the memory is full (60 sets of readings are
stored), the oldest reading will be replaced by new one. Memory will not clear away even if power supply is
removed;
2.After a measurement is finished or when the device stands by, the user can press button 'M1' or button
'M2' to recall memory.Press button 'M1' or 'M2', the display will show the average value of the latest 3
readings as Fig.14;
3.Press again, the display will show '01', which means the latest reading, then turns to another screen to
show readings and measuring time as Fig.15;
4.Press again, the display will show '02', which means the second to the latest reading...
Memory clearance
After a measurement is finished or when the device stands by, hold down button 'M1' or 'M2' for at least 5
seconds, the display will show 'CLR' which means the stored reading for 'M1' or 'M2' is removed.