Nokia E73 Guia Del Usuario página 56

Settings
SIP settings
●
XDM profile — Create an XDM profile. The XDM profile is required for many
●
communications applications, for example, presence.
Presence — Edit the settings for presence (network service). To register for the
●
service, contact your service provider.
Remote drives
●
Configurations
●
receive configuration settings.
Access points
Create a new access point
Select Menu Ctrl. panel
>
You may receive access point settings in a message from a service provider. Some
or all access points may be preset for your device by your service provider, and you
may not be able to change, create, edit, or remove them.
When you select one of the access point groups (
the access point types:
indicates a protected access point
indicates a packet data access point
indicates a Wi-Fi access point
To create a new access point, select
for available connections. After the search, connections that are already available
are displayed and can be shared by a new access point. If you skip this step, you
are asked to select a connection method and to define the settings needed.
To edit the settings of an access point, select one of the access point groups, scroll
to an access point, and select Edit. Use the instructions provided by your service
provider to edit the following:
Connection name
●
Data bearer
●
Depending on the data connection you select, only certain setting fields are
available. Fill in all fields marked with
can be left empty, unless your service provider has instructed otherwise.
To use a data connection, your service provider must support this feature, and if
necessary, activate it for your SIM card.
56
— View or create session initiation protocol (SIP) profiles.
— Connect the device to a remote drive.
— View and delete trusted servers from which your device may
Settings
>
— Enter a name for the connection.
— Select the data connection type.
and Connection
,
Access point. The device asks you to check
Must be defined
© 2010 Nokia. All rights reserved.
> Destinations.
, , , ), you can see
or with a red *. Other fields