We R Memory Keepers TYPECAST Manual Del Propietário página 4

• Advance paper using either Carriage Return Lever
to desired starting position.
• Return Paper Retention Bar
SET TAB
• You can set or remove tabs using the Space Bar and Tab Set Lever
• To set tab, press Space Bar
up to "+". Repeat as needed.
• To clear tab, press Tab Key . When typewriter carriage stops at tab, move Tab Set
Lever down to "-".
PAPER RETURN
• The Carriage Return Lever
position. Prior to reaching the right margin position, there will be an audible bell. This bell
indicates when the carriage should be returned to the left margin. To return the carriage,
push the Carriage Return Lever to the right. Move the carriage until it stops. This will also
advance the paper based upon line spacing setting.
CHANGE TYPE COLOR
• To type using the black portion of the ribbon, move Ribbon Color Selector
down to "BLK" postion
• To type using the color portion of the ribbon, move Ribbon Color Selector
up to "CLR" position.
CHANGING TYPEWRITER RIBBON
• Remove Top Housing
then lift it from the typewriter.
• Swing Ribbon Control Arms
• Remove Ribbon Spools
• Place new spool of ribbon onto Ribbon Spool Shafts
• Ribbon Control Arms
• Place ribbon in between left and right Ribbon Guide Posts
• Lift Ribbon Carrier
• Replace Top Housing
body of typewrtier, push Top Housing down, and slide toward back of typewriter.
to down position.
desired number of spaces and push Tab Set Lever
is designed to return the carriage to its left margin starting
by sliding Top Housing forward
away from spool.
from Ribbon Spool Shafts
should be on the outside of spool.
and thread ribbon through Ribbon Carrier.
by inserting the pins underneath Top Housing into key holes on
or the Roller Knobs
.
.
.
.