Using The Chopper - Tristar MX-4157 Manual De Usuario

can adjust the speed with the speed selector (No. 1). The higher the
speed, the shorter the processing time required. To select a different
speed setting, turn the speed selector to the preferred setting before or
while you press the normal speed button.
• When you use the turbo speed button, the appliance operates at maximum
speed. In this case, you can't adjust the speed with the speed selector.
• Blend the ingredients by moving the appliance slowly up and down
and in circles.
• Press the release buttons (No. 6) to disconnect the motor unit of the
Blender Stick.
uSINg The haND whISk
• The Whisk is intended for stiring minor ingredients such as egg white,
cream, instant desserts and eggs and sugar for cakes. Do not beat thicker
mixtures such as margarine and sugar, this may damage the Whisk. For
this use the blender stick (No.7). Connect the whisk (No.5) to the whisk
base (No.8) by pushing the whisk into the opening on the whisk base.
Now connect the whisk base to the motor unit.
• Immerse the whisk completely in the ingredients. - To avoid splashing,
start processing at normal speed by pressing the normal speed button
(No. 2). To select a different speed setting, turn the speed selector (No.
1) to the preferred setting before or while you press the normal speed
button.

uSINg The choPPeR

• The chopper is intended for chopping ingredients such as nuts, meat,
onions, hard cheese, boiled eggs, garlic, herbs, dry bread etc.
• The blades are very sharp! Be very careful when you handle the blade
unit, especially when you remove it from the bowl, when you empty
the bowl and during cleaning.
• Place the Blade unit (No. 11) at the pivot point in the middle of the
bowl (No. 9).
• Attention! The Blade unit is very sharp. Screw the lid (No.10) clockwise
onto the bowl. Place the motor unit (No. 4) on the lid until it locks in
place and a 'click' sound is heard..
• Press and hold the normal (No. 2) or turbo (No. 3) speed button to
switch on the appliance. When you use the normal speed button, you
can adjust the speed with the speed selector.
• (No. 1). The higher the speed, the shorter the processing time required.
To select a different speed setting, turn the speed selector to the pre-
ferred setting before or while you press the normal speed button.
• When you use the turbo speed button, the appliance operates at maximum
speed. In this case, you can't adjust the speed with the speed selector.
• After processing, release the normal or the turbo speed button to
switch off the appliance and wait until the blade has stopped rotating.
• Press the lid release buttons (No. 6) and turn the lid anti-clockwise to
remove it.
TIPS
• If the ingredients stick to the wall of the bowl, release the button to
switch off the appliance and loosen the ingredients with a spatula or
add some liquid.
• The appliance chops very quickly. Use the normal speed button or the
turbo speed button. If you use the turbo speed button, use it briefly to
prevent the food from becoming too finely chopped.
Stick blender
eN
5