Domo DO231SR Manual De Instrucciones página 63

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 69
www.domo-elektro.be
handle or on the extension tubes. Can be used to clean seams of tiles, ceramics or
marble.
TIPS
Water
Use tap water.
When tap water is too hard, use distilled water when you clean steam clean mate-
rials with a light colour to prevent stains caused by scale.
IMPORTANT : Don't add detergent, perfumes, oils or other chemicals to the water.
Use tap water or distilled water when the tap water is too hard.
Temperature
The temperature of the steam at the end of the concentrator is about 104°C to 116°C.
At a distance of 25 cm from the end of the concentrator the temperature is about
38°C.
Use of cloths
Use white clothes of 100 % pure cotton terry cloth for the best result.
Take a white terry cloth: dimensions about 20 cm x 42,5 cm.
Place the floor brush on the cloth and fold the cloth around both smallest sides of
the brush. Make sure the long sides of the brush will not be covered by the cloth.
Attach the cloth under the hooks on top of the brush.
The use of a cloth is necessary to absorb moisture and dirt. Always use dry
cloths. Wash the cloths with a strong detergent and bleach.
When using a wash softener during washing, the scent of the wash softener will
be spread during steaming.
ATTENTION : The cloth around the brush can become very hot and cause burns.
Only touch the cloth when it has cooled down.
Working efficiently
Clean vertical surfaces always from the top down, this way the dirty water can-
not soil already cleaned surfaces.
Avoid moving the brush back and forth during cleaning.
Use the detail brushes first for cleaning hard to reach places and corners.
Remove dirt as quickly as possible, otherwise it will dry out and get stuck to the
surface again.
ADVICE CONCERNING THE USE OF THE STEAM SHARK
WOOD, VINYL AND MARBLE FLOORS
Use the floor brush with a white cloth. Move the brush as you are mopping. When the
63
DO231SR

Publicidad

Tabla de contenido
loading

Tabla de contenido