CHI 13108 Manual De Uso página 7

How to Use Steam Shot
w CAUTION
escaping steam.
NOTES:
• To avoid garment damage, check garment label before
using Steamer. The label inside the clothing should
recommend fabric care instructions.
• Steaming garments will give a relaxed, not pressed, look.
• Do not use Steamer if garment label has this symbol (
1. To Steam: Make sure iron
is unplugged and the Steam
Shot Lever is at
position. Lift Water Fill Door
and add untreated tap water
to the MAX Fill Line through
the opening. If you have
extremely hard water, mix
50% untreated tap water with
50% distilled or demineralized
water for use in the iron.
Press to snap cover closed. Plug into outlet. The red
Power/Ready Indicator Light will flash. Turn Temperature
Setting Dial to the linen/cotton setting. Only the maximum
setting should be used with the Steam Shot. When the
temperature is reached, the light will stop flashing. The
Steam Shot Lever can now be moved to the
Shot) position and it is ready to steam.
Burn Hazard. Steam is hot. Avoid contact with
(Dry Iron)
).
(Steam
7