Makita DMR108 Manual De Instrucciones página 7

The following table indicates the operating time on a single charge in Radio mode.
Battery capacity
1.0 Ah
1.3 Ah
1.5 Ah
2.0 Ah
3.0 Ah
4.0 Ah
5.0 Ah
6.0 Ah
: Cluster Battery
: Slide Battery
Note:
Table regarding to the battery operating time above is for reference. The actual operating time may differ with the type of
the battery, charging condition, or usage environment.
Installing or removing Slide battery
cartridge (Fig. 4 & 5)
• To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Always insert it all the way until it locks in
place with a little click.
• If you can see the red indicator on the upper side of the
button, it is not locked completely. Install it fully until the
red indicator cannot be seen. If not, it may accidentally
fall out of the tool, causing injury to you or someone
around you.
• Do not use force when inserting the battery cartridge. If
the cartridge does not slide in easily, it is not being
inserted correctly.
• To remove the battery cartridge, withdraw it from the
tool while sliding the button on the front of the cartridge
or pressing the buttons on both sides of the cartridge.
Battery Cartridge Voltage
10.8 V –
7.2 V
12V max
BL7010
BL1014
BL1016
BL1021B
BL1041B
14.4 V 18 V
BL1415
BL1815
BL1415N
BL1815N
BL1820/
BL1820B
BL1430
BL1830/
BL1830B
BL1440
BL1840/
BL1840B
BL1450
BL1850/
BL1850B
BL1860B
Installing or removing Cluster battery
cartridge (Fig. 6 & 7)
• To insert the battery cartridge, align the tongue on the
battery cartridge with the grove in the housing and slip
it into place.
• To remove the battery cartridge, take the battery out of
the terminal while pressing the buttons on the side of
cartridge.
Return the battery compartment locker to the original
position.
Reduced power, distortion, "stuttering sound" or when
both low battery sign
the display are all the signs that the main battery pack
needs to replace.
Note:
The battery pack can't be charged via the supplied AC
power adaptor.
When low battery sign
keeps on flashing is the time to replace the back up
batteries.
At speaker output = 50 mW +
50 mW (unit: Hour)
(Approximately)
In Bluetooth
In radio or AUX with USB
charging
7 0.8
8.5 1.5
9
9.5 1.8
10
2.5
13 2.5
14 3.5
20 4.5
21
26
27
28
34
35 8.5
42 10
and "POWERFAIL" appear on
appears and an "EMPTY"
®
2
2
5
5
6
7
8
7