Neriox 112576 Instrucciones De Uso página 3

3
112576
DEPTH CALIPER DIGITAL
Operating instructions
2
Legend:
1. Measuring bridge
2. Measuring rail
3. LCD display
4. OFF/ON key for activation and deactivation
5. ZERO key for resetting display to zero
6. mm/inch key, mm/inch conversion
7. Locking screw
8. Battery compartment
Safety-relevant information
• Use caliper at permissible temperature only
• Protect caliper against liquids and moisture
• Protect caliper against mechanical damage
• Properly dispose of caliper
Repair
If the instrument is defective, please contact our
service centre → Servicecenter@brw.ch
Brütsch/Rüegger Werkzeuge AG, Heinrich Stutz-Strasse 20, Postfach, CH-8902 Urdorf, Tel. +41 44 736 63 63, Fax +41 44 736 63 00, www.neriox.tools, sales@brw.ch
1 6 7
4 5
3
Specification
Measurement range: 200 mm / 300 mm / 500 mm
Resolution: 0.01 mm
Operating temperature: 0...40°
Energy: Silver oxide battery SR44 (357/303) / 1.55 V
Properties
LCD display
Power ON/OFF
mm/inch conversion
Resetting to zero from any position
Operation:
Activation – move measuring saddle
Deactivation – automatic shutdown after 5 minutes
Resetting display to zero – briefly press ZERO key
mm/inch conversion – briefly press mm/in key
Instructions for care:
Keep the measurement rail clean. A soft cloth can be used for cleaning the surfaces.
Do not use petrol, acetone or isopropanol for cleaning under any circumstances.
Remove the battery if the instrument is not going to be used for an extended period.
8