Troubleshooting - Archos Manual De Usuario

Advice: adjust yourself for 4-5 minutes until you calm down.

TROUBLESHOOTING

This section includes a list of error messages and frequently asked questions for
problems you may encounter with your wrist blood pressure monitor. If the products
not operating as you think it should, check here before arranging for servicing.
PROBLEM
No power
Low
batteries
Error
massage
20
Manuel_BPM_book.indd 20
SYMPTOM CHECK THIS
Display will Batteries are exhausted.
not light up.
Batteries are inserted
incorrectly.
Display is dim Batteries are low.
or Display
Data communication
has failed
shows
Error 1 shows Inflation is slow or the
cuff is not secure.
Error 2 shows The cuff is very tight
Error 3 shows The pressure of the cuff
is excess.
REMEDY
Replace with new batteries
Insert the batteries correctly
Replace with new batteries
Check if the APP is on or not, try
data transmission again.
Refasten the cuff and then
measure again.
Readjust the cuff, not too loose or
too tight and then measure again.
Refasten the cuff and then
measure again.
06/06/2014 10:21:22