Operation; Adjusting The Cutting Length; Switching The Device On And Off - Heiniger Style Midi OC20 Manual De Instrucciones

1. Check conformability between the mains voltage on the nameplate of the
plug-in power supply unit [1] and the available current.
2. Insert the plug-in power supply unit into the socket and the plug [3] of the
plug-in power supply unit into the socket of the charger [2].
3. Place the device in the charger [10]
•
You can also charge the device, in which you insert the power cable of the
plug-in power supply unit directly into the charging socket of the device [8].
Colours of the LED charge level indicator [5] display the charging status:
Colour
Red
Yellow
Green
Notice
Charging status
The battery has drained.
Battery has discharged partially.
Battery is full.

Operation

Adjusting the cutting length

With comb attachment
Insert the desired comb attachment [14] on the knife head. Use only original
accessories!
You can get the best cutting results in combination with the comb attachment
in level 1 (0.5 mm) of the cutting length adjustment.
With the knife head
Cutting length of the knife head can be adjusted in 4 levels from 0.5 to 2.5 mm.
Adjust the desired cutting length using the lever [6] on the underside of the
device.

Switching the device on and off

Actuate the on/off button [5].
Operation
25