Usage Instructions; Maintenance And Storage - Hudora 83340 Instrucciones De Montaje Y De Uso

INSTRUCTIONS FOR ASSEMBLY AND USE
EN
SAFETY INSTRUCTIONS
• These protector pads are suitable for users of cycles, skateboards, roller
skates and inline skates. These protector pads are not suitable for use on
motor-cycles. They are not suitable for acrobatic or high-speed skating or ska-
ting in a half-pipe.
• Your protectors must fit correctly, so that they do not move during a fall. Before
you get moving make sure that everything is positioned correctly. The protec-
tors should sit comfortably. It is extremely important to first make sure that the
protectors offer you sufficient space even when closed. Your blood circulation
must never be disturbed! Remember never to skate without your protectors
and a helmet!
• Before each use, especially after a fall or accident, check the protectors for
damage. The protectors should be discarded and replaced if the shell shows
denting, cracking, deep scratches, deformation, loose parts or discolorations /
the padding underneath the shell is compacted or holed / the straps no longer
fasten, have become overstretched, torn or abraded / the protectors no longer
fit or cover the intended areas!
• In order not to impair the safety of this product, do not make any modifications
on the product or parts of it!
• Even under correct use of the protectors, we cannot guarantee complete pro-
tection against injury. The protectors cannot offer absolute protection, always
carry out your sport carefully. To reduce the risk of injury, always be conside-
rate of others and skate sensibly and within your ability.
• Note that the protective effect of the product may be impaired on very hard
surfaces.
• At speeds above 13 km/h the protective effects in case of a fall can no longer
be guaranteed.
• The product will not protect the wearer in the event of the collisions with mo-
ving vehicles!
• Changes in environmental conditions, such as extreme temperature fluctua-
tions, may reduce or eliminate the protective effect of your protectors.
• Contamination, alteration to the protector, or misuse would dangerously redu-
ce the performance of the protector!
• It is recommended to replace your protective gear after 2 years.

USAGE INSTRUCTIONS

The size classes are just for orientation. If the protectors do not sit firmly and
comfortably another size should be chosen.
The anatomically formed shells offer a great fit, high wearing comfort and keep
joints in their correct position. The tough shell (PE) and padding (EVA) minimise
shock during a fall and prevent rubbing and nicks. The major materials are PE,
EVA, polyester and spandex.
Wrist guards (fig. 1):
Help to protect your wrist during a fall. The support underneath the hand helps
to cushion the fall. The shape helps to minimise grazes on the fingers and helps
you to glide during a fall.
Elbow pads and knee protectors (fig. 2 & 3):
Help you glide along the asphalt when falling, so that the fall is cushioned.
Year of manufacture: 2017
Notified body:
SGS United Kingdom Ltd.
Unit 202B, Worle Parkway
Weston-super-Mare
BS22 6WA, UK.
Notified Body Nr.: 0120
HOW TO PUT ON YOUR PROTECTORS
If children use the protectors, adult supervision is recommended during fitting.
Always wear the protectors on the correct side. The left side is marked with an
"L", the right side with an "R".
Wrist guards (fig. 1):
Open the hook and loop fastening and insert your thumb into the hole, so that the
palm of your hand lies on the cushioned back of the shell. The wrist guard should
be fitted so that the crash plate protects the palm and wrist. Now tighten up the
straps and fasten the hook and loop for a comfortable fit.
Elbow pads and knee protectors (fig. 2 & 3):
Open the hook and loop fasteners and pull on the sock. Fit the elbow pads so that
the point of the elbow is fitted snugly into the centre of the elbow pad. And ensure
that the knee pads are placed symmetrically over the kneecap. Fix the straps and
hook and loop fasteners so that the protectors are secure.

MAINTENANCE AND STORAGE

Use a dry or damp cloth only to clean the product; do not use special cleaning
agents! Check the product for damage or traces of wear and tear before and after
each use. Do not make any structural changes. For your own safety, please use
original spare parts only. These can be sourced from HUDORA. If parts become
damaged or if sharp edges or corners should develop, the product may not be
used any more. If in any doubt, please contact our service team (http://www.
hudora.de/service/). Store the product in a safe place where it is protected from
the elements, cannot be damaged, and cannot injure anyone.
Do not wash! Do not use strong cleaners or detergents! Hand wash only! Do not
iron! Do not tumble dry! Do not bleach!
Always clean with a damp cloth and mild detergent. Use of chemical and cleaning
solvents, paints and abrasive can cause unseen damage to the pads and reduce
their ability of protection. Use clear water only. If your protectors are very dirty try
to clean them gently with luke warm water and a brush. Rinse the protectors with
clear water. Do not dry the protectors on a heating. After use you should try to air
your protectors in a room with good air circulation. Never leave your protectors
exposed to direct sunlight or heat. Elevated temperature beyond 40° C would
dangerously reduce the performance of the protectors.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection
point provided in your area. Local waste management companies will be able to
answer your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we
put just as much effort into rectifying them. You can find numerous information
on the product, replacement parts, solutions to problems and lost assembly ma-
nuals at http://www.hudora.de.
All images are examples of the design.
5/12