Memory Mode - miniland baby thermoadvanced plus Manual De Instrucciones

1. If the display is in standby, press any button to wake it up.
2. Place the thermometer in your hand with your thumb
resting on the object button [ ].
3. Hold the thermometer so that the probe's position
is at a distance between 3-5 cm from the liquid and/or
surface you want to take the temperature of.
4. Press and release the object button [ ] to take a reading. The thermometer will
beep once and then twice again indicating the reading is finished.
5. Remove the thermometer from the object. The LCD
displays the temperature.
6. Press the object button [ ] to start a new reading or press Set/Mem button [ ]
to return to standby mode.
7.2.5. ROOM TEMPERATURE READING
• The thermometer is constantly reading the room temperature.
• The room temperature can be viewed when in standby mode.
• Press the Set/Mem button [ ] to return to standby mode.

7.3. MEMORY MODE

Each forehead temperature result will automatically be stored in the memory.
Once the 9th temperature has been taken the first set of data will be removed and
the new recording will take the top position.
1. Press Set/Mem button [ ] to check the memory number, temperature and
date."-- -" will be displayed if no data is stored.
2. Press the Set/Mem button [ ] again whilst in memory mode to step between
stored data. Press and hold Set/Mem button [ ] to scroll quickly between stored
data.