Specifications - Ikegami IEN-T01 Manual De Instrucciones

12. Specifications

(1) Video input:
(2) Pixel size:
(3) Image compression format:
(4) Image quality:
(5) Frame rate:
(6) Audio:
(7) Privacy masking function:
(8) Motion detection function:
(9) Image recording function:
(10) Alarm mail function:
(11) Physical interface:
(12) Protocol:
(13) Monitoring:
(14) External equipment control: RS-232C DCE, RS-485
(15) Alarm terminal:
(16) Supply power:
(17) Power consumption:
(18) Ambient operating
temperature/humidity:
(19) Outer dimensions:
(20) Weight:
(21) Input/output connectors:
(22) Accessories:
Composite 1.0 Vp-p/75 Ω unbalanced
With automatic terminating loop through
RS-170A-compliant (color) or RS-170-compliant B/W)
720 x 480, 720 x 240
360 x 240 (120), 180 x 120 (60)
with scalable delivery function
JPEG2000
5 levels
Max. 30 fps
Frame rate control : 7 levels
ADPCM interactive
Line input : -10 dBV, 10k Ω unbalanced
Line output : -10 dBV, 600 Ω unbalanced
(Interrupted depending on line conditions)
Provided (masking presettable)
Provided (masking presettable)
Alarm and pre-alarm (time specified)
Provided (POP before SMTP/SMTP-AUTH compatible)
Ethernet (10Base-T/100Base-TX)
TCP/IP, SMTP, POP3, DHCP, HTTP, NTP
Internet Explorer 6.0
Input : No-voltage contact (Over 100 ms),
Output : Open collector (max. 24 V, 50 mA)
AC 24 ± 10%, 50/60 Hz / DC 12 V (10.5-15 V)
PoE (IEEE 802.3af)
Approx. 6.5 W on AC 24 V, approx. 5.5 W on DC 12 V
-10 to +50°C, 30-90%RH (no condensation)
88 (W) x 44 (H) x 159 (D) mm
(projections and accessories not included)
Approx. 570 g
* Ethernet : RJ-45
* VIDEO IN : BNC (automatic termination)
* VIDEO OUT : BNC (loop through)
* AUDIO IN : Pin jack
* AUDIO OUT : Pin jack
* AC24V/DC12V: 2P push-in terminal (common for AC/DC)
* DC12V : AC adaptor jack
* ALARM : 4P push-in terminal (one each for IN and OUT)
* RS-485 : 3P push-in terminal
* RS-232C : 9P D-SUB (male)
Instruction Manual, 1 copy
E-13