Applied Connections; Connecting To The Rs-232C Connector; Connecting To The Audio Terminals; Connecting To The Rs-232C Connector And Audio Terminals - Ikegami IEN-T01 Manual De Instrucciones

6. Applied connections

6-1. Connecting to the RS-232C connector

Make sure in advance that the encoder power is not turned on.
* Typical connections
* RS-232C control
- The same commands as with RS-485 are outputted. A protocol analyzer added in between
enables to monitor communications from a client PC.
- The product can be customized to suit user-specified RS-232C-compatible equipment. In
this way, a client PC may be used to control the system. (You will be charged for customiz-
ing the product. Contact your dealer.)

6-2. Connecting to the AUDIO terminals

Make sure in advance that the encoder power is not turned on.
* Typical connections
Microphone
* Audio connections
The encoder's audio signal is sent to the client PC. The voice via the client PC's microphone is
outputted.

Connecting to the RS-232C connector and AUDIO terminals

RS-232C ( DCE )
RS-232C cable
AMP
AUDIO
IN
E-5
Protocol
analyzer
AMP
OUT
Speaker