Applied Connections; Connecting To The Alarm Terminals; 5-2.COnnecting To The Rs-485 Terminals; Connecting To The Alarm Terminals Or Rs-485 Terminals - Ikegami IEN-T01 Manual De Instrucciones

5. Applied connections

5-1. Connecting to the alarm terminals

Make sure in advance that the encoder power is not turned on.
* Typical connections
* Alarm action
IN : If an alarm signal comes in, the alarm message is e-mailed to a designated ad-
dress. An alarm output is given.
OUT : If the alarm input is short-circuited or the motion detector is activated, an output is
given for a specified time.
5-2. Connecting to the RS-485 terminals
Make sure in advance that the encoder power is not turned on.
* Typical connections
* RS-485 control
- Hooked up with Ikegami's I-LAN-compatible equipment, presettable dome cameras and the
like can be controlled using Internet Explorer of a client PC.
- The product can be customized to suit user-specified RS-232C-compatible equipment. In
this way, a client PC may be used to control the system. (You will be charged for customiz-
ing the product. Contact your dealer.)

Connecting to the alarm terminals or RS-485 terminals

IN OUT RS485
Open collector
Max DC24V 50mA
No-voltage contact
IN OUT RS485
Twisted pair cable
I-LAN-compatible equipment
+24V
10KΩ
Alarm
External unit's alarm input
Coaxial cable
Presettable controller
PCS-351
E-4
Presettable
camera