ratiotec Compact Manual De Instrucciones página 6

User manual rapidcount Compact
Introduction
Dear customer,
Thank you for deciding on the rapidcount Compact banknote counter from ratiotec. You made a good
choice with the purchase of this quality product. With this device you will be able to count unsorted
banknotes both quickly and easily. Please read through the operating instructions carefully to ensure a
smooth and trouble-free operation. We additionally recommend an yearly maintenance of the product.
The ideal counting capacity is limited to 0,3 million banknotes per year.
Contents
Banknote counter rapidcount Compact, banknote rail, mains cable, user manual.
Preventive measures
Do not store the machine in a hot or humid place. Do not expose the machine to direct sunlight or rain.
Operate the machine only on a flat and firm surface. Do not insert coins or other items in the banknote
feeder, except for banknotes. Do not lean over the device to avoid hair or ties jamming in the banknote
feeder.
Device views
Front side
3
1
2
4
5
Rear side
1
2
4
6
3
5
10
1. Display
2. Keys
3. Banknote feeder
4. Banknote rail
5. Banknote stacker
1. Service cover
2. Connection for printer
3. Connection for mains cable
4. Connection for external display
5. Mini USB port
6. SD Card port
Control panel
1 2 3
5
6
4
8
7 9
11 10
Display
1 2
3
4
5
6
7
8
Operation
Self-test
Connect the mains cable and switch on the machine by holding the on/off key for one second. The ma-
chine performs a self-test. Afterwards the machine is available with the last used settings.
Tip: Do not interrupt the self-test by switching off the machine or starting a counting process!
Before counting
To avoid interruptions, sort out damaged or soiled banknotes and remove paper clips and adhesive
tape. Adjust the banknote feeder to the size of the banknote by sliding the grey tab.
Note: In case an error message is shown, please go to section "Error messages".
1. CUR: Choose a currency, navigate between
menu options
2. MODE: Chose a counting mode
3. ADD: Deactivate / activate the addition function,
change menu options
4. BAT: Choose a preset batch amount
5. +1/+10: Choose a batch amount
6. CLR: Delete the counting result or batch amount
7. PRT: Print the counting results
8. REP: Open and close the display of counting
results
9. MENU: Open and close the menu
10. RESET: Start the counting process
11. ON/OFF: Turn on/off the device
1. Currency
2. Counting mode
3. Battery level
4. Quantity of banknotes counted
5. Value of banknotes counted
6. Batch function
7. Auto function
8. Addition function
11