Rear Spacers - AEG A82900GNW1 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

7.3 Location
7.4 Removing the transport support
3

7.5 Rear spacers

To ensure best performance, if the appli-
50 mm
ance is positioned below an overhang-
ing wall unit, the minimum distance be-
tween the top of the cabinet and the
wall unit must be at least 40 mm . Ideally,
however, the appliance should not be
positioned below overhanging wall units.
The ventilation space can be:
• directly above the appliance
• behind and above the top cupboard.
In this case, the space behind the top
cupboard must be at least 50 mm
deep.
Your appliance is equipped with trans-
port support to secure the door during
transportation.
To remove them do these steps:
• Open the door.
• Remove the transport support from
the door sides.
• Remove the transport support from
the lower hinge (some models).
2
• Install the two spacers and the locking
pins provided within the accessory
bag as shown in the figure.
• Install the spacer at the back of the
appliance. Insert the locking pin.
Some models are fitted with a si-
lencing pad under the cabinet.
Do not remove this pad.
ENGLISH
15

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

A82900gnb1A82900gnx1

Tabla de contenido