Technical Data; Battery Replacement - CST/BERGER MAGNA-TRAK 200 Serie Manual De Instrucciones

TECHNICAL DATA:

Power
Battery life
Output
to protect from direct contact.
LCD Display
Weight Approximately
Operating temperature
Length
Construction
Nominal Sensor

BATTERY REPLACEMENT

(1) Switch off the device using the main switch
(2) Remove the battery cover
(3) Insert the batteries as shown in the illustration(fi g. 3)
(4) Close the battery compartment lid and click it home
OPERATION
Switch on the device
Check battery levels:
Battery symbol
in the display shows:
Six "AA" (11⁄2 volt) batteries
Approx. 25 hours of intermittent operation (alkaline
batteries) Magnifi cation
Powerful magnetic speaker with molded cover
Numeric digital, analog Bar-graph, power line
indicator and low battery indicator feature
2.5 lbs. with batteries
0°F to 120°F (-18°C to 49°C)
42 3⁄4 inches (108.6 cm)
High-impact water resistant plastic, epoxy
painted. Aluminum sensor tube waterproof to
just under the plastic case.
20 inches (50.8 cm)
Specifi cations subject to change without notice.
3 fi elds:
2 fi elds:
1 fi eld:
0 fi elds:
Battery full
Battery operable
Battery almost empty
Battery empty
MT200 Series Locators • 9