GGP ITALY B 28J Manual De Instrucciones página 13

1
INTRODUCTION / CONFORMITY STATEMENT
EN
Dear Customer,
thank you for choosing one of our products. We hope that you will be completely satisfied with this machine
and that it fully meets your expectations. This manual has been compiled in order to provide you with all
the information you need to get acquainted with the machine and use it safely and efficiently. Don't forget
that it is an integral part of the machine, so keep it handy so that it can be consulted when necessary, and
pass it on to a further user if you resell or loan the machine.
Your new machine has been designed and manufactured in pursuance of current regulations, and is safe
and reliable if used in compliance with the instructions provided in this manual (proper use). Using the ma-
chine in any other way, or non-compliance with the safety specifications relative to use, maintenance and
repair is considered "improper use" which will invalidate the warranty, relieve the manufacturer from all li-
abilities, and the user will consequently be liable for all and any damage or injury to himself or others.
Since improvements are periodically made to our products, you may find slight differences between your
machine and the descriptions contained in this manual. Certain modifications can be made to the machine
without prior warning and without the obligation to update the manual, although the essential safety and
function characteristics will remain unaltered. In case of any doubts, please contact your Retailer. And now
enjoy your work!
WARNING!
This accessory can only be fitted on
brush cutters / grass trimmers with expandable rod, model:
B 28J • TR 26J • TB 26J
EC Conformity Statement
In accordance with Machinery Directive 2006/42/CE and subsequent amendments
GGP ITALY S.p.A. - Via del Lavoro, 6 - 31033 Castelfranco V.to (TV) - ITALY
declares under its responsibility that the machine:
PRUNER
Conforms to the safety and health protection requirements pursuant to the aforesaid EC Directive.
GGP ITALY
SPA
Via del Lavoro, 6 – 31033 Castelfranco V.to (TV) - ITALY
Vice President R&D and Quality
Ing. Raimondo Hippoliti
Caution: read the instruction manual carefully before using the device.