Troubleshooting - Craftsman 580.750290 Instrucciones De Uso

ProbJern
Pump has following problems:failure
to producepressure, erratic pressure,
chattering, loss of pressure, low water
voJurne.
Unit fails to start when spray gun
trigger is squeezed.
Detergent faiJsto mix with spray.
Cause
1. Water inlet is blocked.
2. inadequatewater supply.
3. Garden hose is kinked or leaking.
4. Cloggedwater inlet screen.
5. Water supply is over IO0°F (38°C).
6. High pressure hose is blocked or
leaks.
7. Spray tip is obstructed.
8. Pump is faulty.
1. Water supply is not turned on.
2. Unit is not turned on.
3. Garden hose is too long.
1. High pressure spray tip installed.
Correction
1. Clear inlet.
2. Provide adequatewater flow.
3. Straighten garden hose or replace if
leaking.
4. Checkand clean water inlet screen.
5. Provide cooler water supply.
6. Clear blocks in high pressure hose
or replace hose.
7. Cleanspray tip.
8. Contact Sears service facility.
1. Turn on water supply.
2. Press the master ON/OFF switch to
the Pressure Washer ON position
(I). ResetGFCI.
3. Use only 50 ft. (15.24 m) maximum
garden hose.
1. Replacewith white tipped spray tip.
14